Components

High-speed CMOS IC containing four independent 2-input NAND logic gates with Schmitt-trigger action on all inputs, enabling noise-free pulse shaping, gated oscillators, and switch debouncing.

High-speed CMOS 3-to-8 line decoder/demultiplexer IC with 3 active-low and active-high enable inputs, designed for high-performance memory address decoding and bus demultiplexing.

High-speed CMOS dual 2-to-4 line decoder/demultiplexer IC with active-low enable controls and active-low outputs for address decoding and memory chip selection.

High-speed CMOS IC containing six independent inverting logic gates with Schmitt-trigger inputs for noise immunity, signal conditioning, and pulse shaping.

High-speed CMOS 8-input to 1-output digital data selector / multiplexer with 3-bit binary address selection, active-LOW enable, and complementary true (Y) and inverted (W) outputs in a 16-pin DIP package.

High-speed CMOS Quad 2-input to 1-output digital data selector / multiplexer with common select line and common active-LOW strobe in a 16-pin DIP package, widely used for 4-bit bus switching and DRAM address multiplexing.

High-speed CMOS 4-bit synchronous binary up counter IC featuring synchronous parallel load, synchronous clear, and ripple carry output for cascading.

High-speed CMOS IC containing an 8-bit parallel-load shift register for reading up to 8 digital inputs or push-buttons into a microcontroller using only 3 SPI/GPIO lines.

High-speed CMOS 6-bit D-type flip-flop IC featuring positive-edge clock triggering and common active-low master reset for digital storage and register applications.

High-speed CMOS octal inverting buffer / line driver IC with 3-state outputs and dual active-LOW output enables (1OE, 2OE) in a 20-pin DIP package, widely used for memory address/data line driving and bus buffering.

High-speed CMOS octal non-inverting buffer / line driver IC with 3-state outputs and dual active-LOW enables (1OE, 2OE) in a 20-pin DIP package, widely used for bus driving, level shifting, and memory interfaces.

High-speed CMOS 8-bit non-inverting 3-state bidirectional bus transceiver IC with direction control pin (DIR) and output enable pin (OE), widely used for logic-level translation and bus buffering in 5V/3.3V microcomputer systems.

High-speed CMOS 4-bit binary full adder IC calculating the arithmetic sum of two 4-bit numbers and carry-in, featuring fast internal look-ahead carry generation.

High-speed CMOS IC containing four independent 2-input OR logic gates with standard push-pull outputs operating from 2V to 6V DC.

High-speed CMOS 8-bit D-type transparent latch IC with active-high Latch Enable (LE) and active-low 3-state Output Enable (~OE~), standard in microcomputer memory address demultiplexing and I/O bus port latching.

High-speed CMOS IC containing two independent 4-bit binary ripple counters with active-LOW clock inputs and active-HIGH asynchronous clear pins.

High-speed CMOS IC converting 4-bit BCD input signals to active-HIGH 7-segment LED display outputs with internal data storage latches and 25mA segment drive current.

High-speed CMOS octal non-inverting 3-state buffer / line driver IC with flow-through pinout (inputs on pins 2-9, outputs on pins 11-18) and dual gated active-LOW enables for clean PCB bus routing.

High-speed CMOS 8-bit D-type transparent latch IC featuring a clean flow-through bus architecture (inputs on one side, outputs on the opposite side) with active-high Latch Enable (LE) and active-low 3-state Output Enable (~OE~).

High-speed CMOS 8-bit serial-input parallel-output shift register IC/module with storage register and 3-state outputs, widely used to expand digital output pins for driving LEDs, 7-segment displays, and relays over 3 control wires.

High-speed CMOS 8-bit magnitude identity comparator IC comparing two 8-bit binary words (P and Q) and outputting active-low P=Q when identical.

High-speed CMOS dual D-type flip-flop IC with individual data (D), clock (CLK), set (PRE), and reset (CLR) inputs, widely used for latching, frequency division, and pulse edge detection.

High-speed CMOS IC containing four independent 2-input Exclusive-OR (XOR) logic gates operating from 2V to 6V DC, widely used for binary addition, parity generation/checking, phase detection, and digital comparison.

High-speed CMOS IC containing four independent 2-input NAND logic gates with TTL-compatible input switching thresholds (VIH >= 2.0V, VIL <= 0.8V), standard for interfacing 3.3V/5V TTL logic to 5V CMOS systems.