Components

STMicroelectronics / Texas Instruments / ON Semiconductor 3-terminal fixed +15.0V positive linear voltage regulator delivering over 1.5A output current from input voltages up to 35V DC with internal thermal overload and short-circuit protection.

STMicroelectronics / Texas Instruments / ON Semiconductor 3-terminal fixed +24.0V positive linear voltage regulator delivering over 1.5A output current from input voltages up to 40V DC with internal thermal overload and short-circuit protection.

STMicroelectronics / Texas Instruments 3-terminal fixed -5.0V negative linear voltage regulator delivering over 1.5A output current from negative inputs up to -25V DC, commonly paired with the LM7805 for split ±5V supplies.

STMicroelectronics / Texas Instruments 3-terminal fixed -12.0V negative linear voltage regulator delivering over 1.5A output current from negative inputs up to -35V DC, commonly paired with the LM7812 for split ±12V op-amp audio supplies.

Texas Instruments / National Semiconductor micropower low-dropout (LDO) linear voltage regulator providing tight-tolerance (±0.5%) +3.3V DC output up to 100mA with 380mV dropout in a 3-pin TO-92 package.

STMicroelectronics 9-degrees-of-freedom (9-DoF) System-in-Package featuring a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer with I2C and SPI digital interfaces for 3D orientation tracking.

Linear Technology / Analog Devices classic micropower gated-oscillator DC-DC converter in an 8-pin DIP package, operating from 1.0V to 30V input in boost, buck, or inverting modes with 95µA standby quiescent current.

Analog Devices / Linear Technology 7.5A low-dropout (1.5V max at 7.5A) positive adjustable 3-terminal linear voltage regulator with internal current limiting and thermal overload protection for high-current bench and audio power supplies.

Analog Devices 1.5A low-noise (40µVrms), fast transient response 3.3V fixed low dropout (LDO) linear regulator for high-speed RF, ADC, and audio power rails.

Analog Devices / Linear Technology synchronous step-down DC/DC LED driver controller (6V to 36V input) delivering up to 20A continuous LED current with fast 3-state PWM dimming (3000:1 ratio) and high efficiency for DLP projectors and high-power illumination.

Analog Devices (Linear Technology) 60V, 2A low-EMI Silent Switcher boost/SEPIC/inverting DC-DC converter IC with 9uA quiescent current and 2.0MHz programmable switching frequency.

Analog Devices 600mA high-efficiency synchronous buck-boost DC-DC converter regulating output voltage above, below, or equal to input voltage.

Analog Devices (Maxim) high-efficiency current-mode step-up DC-DC controller IC capable of driving an external N-FET to generate 170V-200V DC for Nixie tubes from a 9V-12V input.

Texas Instruments / Maxim Integrated iconic dual RS-232 driver and receiver IC with internal capacitive charge pumps generating +10V/-10V rails from a single 5V DC supply.

Maxim Integrated pulse oximetry and heart-rate monitor sensor combining Red (660nm) and IR (880nm) LEDs, photodetector, low-noise analog processing, 16-bit ADC, and I2C output (0x57).

Maxim Integrated / Analog Devices integrated pulse oximetry and heart-rate monitor module combining red and infrared LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection over I2C.

Maxim Integrated high-sensitivity optical sensor module incorporating Red (660nm), IR (880nm), and Green (537nm) LEDs with a low-noise 18-bit ADC for particle counting, smoke, and pulse oximetry.

Maxim Integrated 14-bit cold-junction compensated thermocouple-to-digital converter measuring temperatures from -270°C to +1372°C with 0.25°C resolution and SPI read-only output.

Maxim Integrated 19-bit precision cold-junction compensated thermocouple-to-digital converter supporting K, J, N, R, S, T, E, and B type thermocouples with SPI interface.

Maxim Integrated 15-bit precision resistance-to-digital converter optimized for 2-wire, 3-wire, and 4-wire Platinum Resistance Temperature Detectors (PT100 and PT1000 RTDs) with SPI output.

Maxim Integrated low-noise electret condenser microphone amplifier IC featuring high power-supply rejection (112 dB PSRR), single-ended analog output, and onboard 25x-125x trimmer potentiometer gain adjustment.

Maxim Integrated 12-bit cold-junction compensated K-type thermocouple converter IC measuring temperatures from 0°C to +1024°C with 0.25°C resolution and SPI read-only output.

Maxim Integrated / Analog Devices compact serial input/output common-cathode display driver that interfaces microcontrollers to 7-segment numeric LED displays (up to 8 digits) or 8x8 dot matrix LED displays.

Maxim Integrated / Analog Devices compact SPI/QSPI-compatible serial input/output common-cathode display driver with slew-rate-limited segment drivers for reduced EMI, interfacing microcontrollers to up to 8 digits of 7-segment LED displays or 8x8 dot-matrix arrays.